All-Aluminum Aesthetics Enhanced For Colder Climates And Rain
Standard Configurations
Cornerless Folding Configurations for SL45, SL60, SL64 Acoustical, SL70, SL84, WD66, WD65 and WA67
Below are a sample of possible configurations. Please contact NanaWall for many other possibilities.
Shown below are some typical variations:
- Odd number of panels meeting odd number of panels
- Odd number of panels meeting even number of panels
- Even number of panels meeting even number of panels
All standard configurations are available in cornerless options.
Please contact NanaWall if CAD is needed for other configurations.
FourFold Panel Sets for SL60, SL64 Acoustical, SL84, WD66, and WA67
Below are a sample of possible configurations. Please contact NanaWall for many other possibilities.
In any standard folding configuration, between folding panels stacking to the left and folding panels stacking to the right,
additional floating left/right fourfold or sixfold panel sets can be added. Shown are some typical examples.
Please contact NanaWall if CAD is needed for other configurations.
Floor Tracks
High Performance Sill
- Our most weather resistant sill
- May be installed flush at interior floor with outswing units
- Thermally broken for better insulation and energy efficiency
- Click here for performance testing results
*Photo shown is for an inswing system. The outswing system sill is a mirror.
Hybrid Sill - Inswing
Low-Profile Saddle Sill
- Our most popular sill
- Thermally broken for better insulation and energy efficiency
- Partial or full insert available for ADA compliance
- Click here for performance testing results
Flush Sill
- For interiors or protected exteriors
- Where water performance is not needed
- Thermally broken for better insulation and energy efficiency
- Insert available for ADA compliance
Surface Mounted Interior Sill
- For interiors
- Sill rests above the subfloor for easier installation
- Adjustable flanges and available insert for ADA compliance
Handles
Stainless Steel Lever Handles
Stainless steel lever handles and escutcheon plates are available either in a brushed satin, black titanium or anti-viral/anti-microbial copper-nickel finish.
Stainless Steel Flat Handles
Stainless steel flat handles are available either in a brushed satin, black titanium or anti-viral/anti-microbial copper-nickel finish.
Solid Brass Lever Handles
Solid brass lever handles and escutcheon plates are available either in a Oil Rubbed Brass, Satin Nickel or a White finish.
Other Flat Handle Options
Flat handles are available in Dark Brown, White Aluminum, White or matching powder coat finish.
Stainless Steel Lever Handles with Return
Custodial Hardware
Custodial hardware is available to protect from unauthorized access or movement of panels.
Compatible Hardware by Other Manufacturers
Locking
Multipoint locking with latch, deadbolt and top/bottom locking rods
This option is possible only on primary swing door.
Includes top and bottom Polyamide capped locking rods, deadbolt, a Schlage compatible lock set with lockable latch and lever handles on the inside and outside. Depression of handles withdraws latch. Lifting of handles engages rods and turn of key or thumb turn engages deadbolt and operates lock.
Operable from inside and outside.
Two Point Locking
Standard between each pair of bi-fold panels and an option for swing panels. 180 degree turn of handle moves locking rods up or down. Uses 7 mm spindle.
Operable from inside only.
Deadbolt Lock
Possible only on primary or secondary swing panel.
Pull handles on both sides with deadbolt(s) operated by a lockset. Lockset option of having key operations on both sides. With a profile cylinder, panel is lockable with a thumbturn from the inside and a key from the outside. To keep the panel from being blown open, this option should be used with a door closer, but note that a door closer is not possible on a swing panel in a folding system that is not attached to a side jamb
Aluminum Colors
Shown are a selection of colors available.Contact NanaWall for other possible finishes. The samples shown here are representative only. Please consult with your sales representative for actual samples.
Standard Anodized Finish
Other anodized finishes are available on request.
NanaWall Standard Powder Coating Finishes
Additional Powder Coating Finishes
NanaWall® offers over 200 RAL GLOSS powder coated and over 200 RAL MATTE powder coated colors for an additional upcharge.
Glass
Units can be supplied either glazed with 15/16 (24 mm) clear insulating tempered or insulating Low-E tempered glass or other high performing safety glass such as Heat Mirror, Triple Glazed, acoustic, special tint, etc., or other glass on request.
See "Glazing" in the General Introduction for other glass thickness possible.
Glazing Area Options
Most commercially available glazing such as insulated Low-E glass can be used with a NanaWall. Custom layouts with horizontal mullions, simulated divided lites, inserts and high bottom rails are available