For over 30 years, we’ve been leading the industry in developing and refining our glass wall systems to create solutions across every application.
Low Profile Saddle Sill
Featuring a ramp design with flanges that create smooth barefoot and ADA-compliant transitions, the Low Profile Saddle sill is thermally broken for better insulation and energy efficiency.
See Example of drainage of water exiting the weepholes from Low Profile Saddle Sill
Featuring a ramp design with flanges that create smooth barefoot and ADA-compliant transitions, the Low Profile Saddle sill is thermally broken for better insulation and energy efficiency.
See Example of drainage of water exiting the weepholes from Low Profile Saddle Sill
Performance Sill
The Performance sill achieves the best of both worlds. With a lower physical profile, this sill has been thermally broken with excellent performance results. Learn more about Generation 4 sills
The Performance sill achieves the best of both worlds. With a lower physical profile, this sill has been thermally broken with excellent performance results. Learn more about Generation 4 sills
Low Profile Saddle Sill with UniverSILL (Outswing Animation)
The UniverSILL is a patented gasket for the outswing Low Profile Saddle Sill. It can be added on when higher weather performance is needed or it can be removed for ADA compliance or barefoot freedom.
The UniverSILL is a patented gasket for the outswing Low Profile Saddle Sill. It can be added on when higher weather performance is needed or it can be removed for ADA compliance or barefoot freedom.
Stainless Steel Lever Handle
Stainless steel lever handles and escutcheon plates are available either in a brushed satin, black titanium finish.
Stainless steel lever handles and escutcheon plates are available either in a brushed satin, black titanium finish.
Contemporary Stainless Steel Handle
Stainless steel flat handles are available either in a brushed satin, black titanium finish.
Stainless steel flat handles are available either in a brushed satin, black titanium finish.
Spring-Loaded Pull Handle
For outswing units with larger panel sizes, a spring-loaded pull handle is supplied for ease of closing the system. The pull handle is located above the flat handle. When not in use, the handle lays flat against the adjacent panel and is supplied with bumpers to avoid metal-to-metal contact. Handles are either silver or black titanium stainless steel with the attachment to coordinate with the hinge hardware of the system.
For outswing units with larger panel sizes, a spring-loaded pull handle is supplied for ease of closing the system. The pull handle is located above the flat handle. When not in use, the handle lays flat against the adjacent panel and is supplied with bumpers to avoid metal-to-metal contact. Handles are either silver or black titanium stainless steel with the attachment to coordinate with the hinge hardware of the system.
Stainless Steel Lever with Return
Two Point Locking
Concealed locking between folding panels that operates with a 180° turn of a flat handle. Standard to the system is the PowerLock—a pair of locking bolts to the top and to the bottom with approximately a 1″ (24 mm) throw for maximum security engagement into the head and floor track.
Operable from inside only.
Concealed locking between folding panels that operates with a 180° turn of a flat handle. Standard to the system is the PowerLock—a pair of locking bolts to the top and to the bottom with approximately a 1″ (24 mm) throw for maximum security engagement into the head and floor track.
Operable from inside only.
Edge Lock
Standard and Tested Locking for Secondary Swing Panels
Concealed edge lock with top and bottom locking bolts have approximately a 1″ (24 mm) throw for maximum security engagement into the head and floor track. Locking is independently tested for air, water, structural load performance, and forced entry.
*For more hardware options, contact NanaWall.
Standard and Tested Locking for Secondary Swing Panels
Concealed edge lock with top and bottom locking bolts have approximately a 1″ (24 mm) throw for maximum security engagement into the head and floor track. Locking is independently tested for air, water, structural load performance, and forced entry.
*For more hardware options, contact NanaWall.
Multipoint Locking with Latch, Deadbolt and Top/Bottom Locking Rods
Standard and Tested Locking Option on Primary Swing Panels:
Multipoint locking operated by lever handles and with European profile cylinder. Locking is independently tested for air, water, structural load performance, and forced entry.
Includes top and bottom Polyamide capped locking rods, deadbolt, a compatible lock set with lockable latch and lever handles on the inside and outside. Depression of handles withdraws latch. Lifting of handles engages rods and turn of key or thumb turn engages deadbolt and operates lock.
Operable from inside and outside.
Standard and Tested Locking Option on Primary Swing Panels:
Multipoint locking operated by lever handles and with European profile cylinder. Locking is independently tested for air, water, structural load performance, and forced entry.
Includes top and bottom Polyamide capped locking rods, deadbolt, a compatible lock set with lockable latch and lever handles on the inside and outside. Depression of handles withdraws latch. Lifting of handles engages rods and turn of key or thumb turn engages deadbolt and operates lock.
Operable from inside and outside.
Optional Commercial Locking
For Primary Swing Panels (no air, water, or structural load values for primary swing panel)
Deadbolt lock(s) and push/pull handles and key/key European profile cylinder on both sides. Only recommended for end swing panel with door closer by others.
For Primary Swing Panels (no air, water, or structural load values for primary swing panel)
Deadbolt lock(s) and push/pull handles and key/key European profile cylinder on both sides. Only recommended for end swing panel with door closer by others.
Our design team is here to help bring your project to life from sketch to finish. From answering your questions to planning, ordering and optimizing your options, we provide assistance to help you accomplish your goals.
Frequently Asked Questions
There are a number of factors that help us determine the best system for your application including:
- Is this a residential or commercial project?
- Is it an interior or exterior application?
- What city and state is your project located in?
- How big is the opening?
- Is it a ground floor application or a high-rise?
Each system has its own features and benefits engineered to solve specific design requirements. NanaWall provides only the appropriate system for a specific application need. We have four distinct product families: Folding, Sliding, Stacking, and Frameless.
NanaWall is a custom product tailored specifically for your project needs. Numerous features and options make up the price: type of system (we offer 20+), custom opening and panel size, glass type, door hardware, finish choice...to name a few. The best way to determine price is to consult with NanaWall and get a quote, directly from NanaWall, for the exact system that best meets your project requirements and budget. For more information, visit Pricing and Budget Guidelines
We manufacture in Richmond, California, and with our strategic German partner, Solarlux. Operating ISO9000-certified factories in both the US and Germany helps shorten lead times. When discussing your project with your local NanaWall representative, let them know you are interested in having your order expedited.
The lead times vary depending on system selection and design choices. To see our current delivery estimates, click here. To check the status of any order, call 1-(888) 411-NANA and dial extension 255 for Order & Delivery Status.
Watch the Delivery Process video
NanaWall deliver throughout North and Central America. Your local NanaWall representative will best be able to explain the process for obtaining and installing a NanaWall System in your area.
