Monumental System Engineered For The Most Demanding Applications
Standard Configurations
Cornerless Folding Configurations
Below are a sample of possible configurations. These animations are for operational illustration only. Please contact NanaWall for many other possibilities.
Shown below are some typical variations:
- Odd number of panels meeting odd number of panels
- Odd number of panels meeting even number of panels
- Even number of panels meeting even number of panels
All standard configurations are available in cornerless options.
Please contact NanaWall if CAD is needed for other configurations.
Window Door Combinations
Below are a sample of possible configurations. Please contact NanaWall for many other possibilities.
Floor Tracks
High Performance Sill (Raised)
- Our most weather resistant sill
- May be installed flush at interior floor with outswing units
- Thermally broken for better insulation and energy efficiency
- Click here for performance testing results
* Photo shown is for an inswing system. The outswing system sill is a mirror.
Low Profile Saddle Sill at Folding Panel
- Our most popular sill
- Thermally broken for better insulation and energy efficiency
- Partial or full insert available for ADA compliance
- Click here for performance testing results
Low Profile Saddle Sill at Swing Panel
- Our most popular sill
- Thermally broken for better insulation and energy efficiency
- Partial or full insert available for ADA compliance
- Click here for performance testing results
- Note: For ADA compliance in commercial projects, a gasket to cover the channel is provided
Low Profile Saddle Sill with UniverSILL
The UniverSILL is a patent pending gasket for the outswing Low Profile Saddle Sill. It can added on when higher weather performance is needed or it can be removed for ADA compliance or barefoot freedom.
Flush Sill
- For interiors or protected exteriors
- Where water performance is not needed
- Thermally broken for better insulation and energy efficiency
- Insert available for ADA compliance
- Click here for performance testing results
Flush Sill at swing panel
Surface Mounted Interior Sill
- For interiors only
- Sill rests above the subfloor for easier installation
- Adjustable flanges and available insert for ADA compliance
Handles
Stainless Steel Lever Handles
Stainless steel lever handles and escutcheon plates are available either in a brushed satin, black titanium or anti-viral/anti-microbial copper-nickel finish.
Solid Brass Lever Handles
Solid brass lever handles and escutcheon plates are available either in an Oil Rubbed Brass, Satin Nickel or a White finish.
STAINLESS STEEL STANDARD HANDLES
Stainless steel standard handles are available either in a brushed satin or black titanium finish.
View Stainless Steel Standard Handles Data Sheet
Stainless Steel Lever Handles with Return
Custodial Hardware
Custodial hardware is available to protect from unauthorized access or movement of panels.
Compatible Hardware by Other Manufacturers
Locking
Standard to the system is concealed locking between folding panels that operates with a 180° turn of a two-point locking standard handle. The top and bottom locking bolts have approximately a 1′′ (24 mm) throw for maximum security engagement into the head and floor track.
Standard and Tested Locking Options on Primary Swing Panels:
1) Multi-point locking operated by lever handles with European profile cylinder or an adapter to accommodate a 5-7 pin SFIC core (SFIC core supplied by others). Locking is independently tested for acoustics, structural, air, water and forced entry.
Non-standard Commercial Locking Options on Primary Swing Panels:
1) For interior application, single-point single motion locking operated by GU Rhondo lever handles with European profile cylinder or an adapter to accommodate a 5-7 pin SFIC core (SFIC core supplied by others).
2) Push/pull handles on both sides with deadbolt and lockset with key operation. Secured with European profile cylinder or an adapter to accommodate a 5-7 pin SFIC core (SFIC core supplied by others). Suitable for end swing panel only with door closer by others.
3) Panic hardware (prepped, supplied and installed by others):
a) Von Duprin 33/35A Series Narrow Stile Rim Exit Device
Standard and Tested Locking Option for Secondary Swing Panels:
1) Concealed two-point locking with top and bottom locking bolts have approximately a 1′′ (24 mm) throw for maximum security engagement into the head and floor track. Locking is independently tested for structural, air, water, and forced entry.
Non-standard Locking Options for Secondary Swing Panels:
1) Dummy lever handles on both sides with concealed flush bolts that operates the rods at the top and bottom.
2) For interior application, two-point locking with U-shaped handles.
For more hardware options, contact NanaWall.
Multipoint locking with latch, deadbolt and top/bottom locking rods
This option is possible only on primary swing door.
Includes top and bottom Polyamide capped locking rods, deadbolt, a compatible lock set with lockable latch and lever handles on the inside and outside. Depression of handles withdraws latch. Lifting of handles engages rods and turn of key or thumb turn engages deadbolt and operates lock.
Operable from inside and outside.
Deadbolt Lock
Possible only on primary or secondary swing panel.
Push Pull handles on both sides with deadbolt(s) operated by a lockset. Lockset option of having key operations on both sides. With a profile cylinder, panel is lockable with a thumbturn from the inside and a key from the outside. To keep the panel from being blown open, this option should be used with a door closer, but note that a door closer is not possible on a swing panel in a folding system that is not attached to a side jamb
Aluminum Colors
Shown are a selection of colors available Contact NanaWall for other possible finishes. The samples shown here are representative only. Please consult with your sales representative for actual samples.
Standard Anodized Finish
Other anodized finishes are available on request.
NanaWall Standard Powder Coating Finishes
Additional Powder Coating Finishes
NanaWall® offers over 200 RAL GLOSS powder coated and over 200 RAL MATTE powder coated colors for an additional upcharge.
Glass
Units can be supplied either glazed with 15/16 (24 mm) clear insulating tempered or insulating Low-E tempered glass or other high performing safety glass such as Heat Mirror, Triple Glazed, acoustic, special tint, etc., or other glass on request.
See "Glazing" in the General Introduction for other glass thickness possible.
Glazing Area Options
Most commercially available glazing such as insulated Low-E glass can be used with a NanaWall. Custom layouts with horizontal mullions, simulated divided lites, inserts and high bottom rails are available
The Horizon Screen by Wizard
Transforming walls and delivering a dream design can be achieved where weather or flying insects would normally prevent the practicality of creating an open space. A retractable screen add-on is perfect for blocking bugs while providing privacy and fresh air.
Screens are not available through NanaWall Systems.
Matching Windows
Benefit from the same quality and matching aesthetics with operable tilt turns, folding windows, or single track sliding windows. Coordinated fixed transoms and picture windows are also available.
Matching French Doors
NanaWall Matching French Doors are available as single doors or pairs. Very narrow stiles and rails are possible.
NanaWall French Doors use exactly the same profiles and hardware as the matching NanaWall Folding Glass Walls. Hence, the same size charts, glazing options, wood/finish options and finish hardware options as the matching NanaWall Folding Glass Walls are applicable.
The same testing performance results also apply (within a folding system, with an odd number of panels stacking to one side, the last panel is a swing door).